Effect of Copper-Modification of g-C3N4 on the Visible-Light-Driven Photocatalytic Oxidation of Nitrophenols.

Graphitic carbon nitride (g-C3N4) has proved to be a promising heterogeneous photocatalyst in the visible range. It can be used, among others, for the oxidative conversion of environmentally harmful nitrophenols occurring in wastewater. However, its photocatalytic activity needs to be enhanced, which can be achieved by modification with various dopants. In our work, copper-modified g-C3N4 was prepared by ultrasonic impregnation of the pristine g-C3N4 synthesized from thiourea. The morphology, microstructure, and optical properties of the photocatalysts were characterized by XRD, FT-IR, DRS, SEM, XPS, and TEM. DRS analysis indicated a slight change in both the CB and the VB energies of Cu/g-C3N4 compared to those of g-C3N4. The efficiency of the photocatalysts prepared was tested by the degradation of nitrophenols. Copper modification caused a sevenfold increase in the rate of 4-nitrophenol degradation in the presence of H2O2 at pH = 3. This dramatic enhancement can be attributed to the synergistic effect of copper and H2O2 in this photocatalytic system. A minor Fenton reaction role was also detected. The reusability of the Cu/g-C3N4 catalyst was demonstrated through five cycles. Copper-modified g-C3N4 with H2O2 proved to be applicable for efficient visible-light-driven photocatalytic oxidative degradation of nitrophenols.

Characterization of Various Titanium-Dioxide-Based Catalysts Regarding Photocatalytic Mineralization of Carbamazepine also Combined with Ozonation.

Titanium-dioxide-based semiconductors proved to be appropriate for photocatalytic application to efficiently degrade emerging organic pollutants such as various herbicides, pesticides, and pharmaceuticals in waters of environmental importance. The characterization of various TiO2 catalysts, both bare and modified (Ag- and/or N-doped), by mechanochemical treatment was carried out in this work, regarding their structure, morphology, and photocatalytic activity. For the latter investigations, carbamazepine, an antidepressant, proved to be applicable and versatile. The photocatalytic behavior of the catalysts was studied under both UV and visible light. Besides the decomposition efficiency, monitoring the intermediates provided information on the degradation mechanisms. Mechanochemical treatment significantly increased the particle size (from 30 nm to 10 µm), causing a considerable (0.14 eV) decrease in the band gap. Depending on the irradiation wavelength and the catalyst, the activity orders differed, indicating that, in the mineralization processes of carbamazepine, the importance of the different oxidizing radicals considerably deviated, e.g., Ag-TiO2 < DP25-TiO2 < ground-DP25-TiO2 < N-TiO2 ≈ N-Ag-TiO2 for O2•− and N-TiO2 ≈ Ag-TiO2 < N-Ag-TiO2 < ground-DP25-TiO2 ≈ DP25-TiO2 for HO• generation under UV irradiation. Toxicity studies have shown that the resulting intermediates are more toxic than the starting drug molecule, so full mineralization is required. This could be realized by a synergistic combination of heterogeneous photocatalysis and ozonation.

The Photocatalytic and Antibacterial Performance of Nitrogen-Doped TiO2: Surface-Structure Dependence and Silver-Deposition Effect.

Catalysts for visible-light-driven oxidative cleaning processes and antibacterial applications (also in the dark) were developed. In order to extend the photoactivity of titanium dioxide into the visible region, nitrogen-doped TiO2 catalysts with hollow and non-hollow structures were synthesized by co-precipitation (NT-A) and sol-gel (NT-U) methods, respectively. To increase their photocatalytic and antibacterial efficiencies, various amounts of silver were successfully loaded on the surfaces of these catalysts by using a facile photo-deposition technique. Their physical and chemical properties were evaluated by using scanning electron microscopy (SEM), transmission electron microscopy-energy dispersive X-ray spectroscopy (TEM-EDS), Brunauer-Emmett-Teller (BET) surface area, X-ray diffraction (XRD), and diffuse reflectance spectra (DRS). The photocatalytic performances of the synthesized catalysts were examined in coumarin and 1,4-hydroquinone solutions. The results showed that the hollow structure of NT-A played an important role in obtaining high specific surface area and appreciable photoactivity. In addition, Ag-loading on the surface of non-hollow structured NT-U could double the photocatalytic performance with an optimum Ag concentration of 10-6 mol g-1, while a slight but monotonous decrease was caused in this respect for the hollow surface of NTA upon increasing Ag concentration. Comparing the catalysts with different structures regarding the photocatalytic performance, silverized non-hollow NT-U proved competitive with the hollow NT-A catalyst without Ag-loading for efficient visible-light-driven photocatalytic oxidative degradations. The former one, due to the silver nanoparticles on the catalyst surface, displayed an appreciable antibacterial activity, which was comparable to that of a reference material practically applied for disinfection in polymer coatings.

Assessment of the potential bactericide effect of self-cleaning floors: a proposed protocol.

The antibacterial properties of self-cleaning coatings are based on bactericide nanoparticles (NPs). Ecotoxicity of these NPs have been assessed mostly in suspension, using standard bioassays. Here a protocol is proposed to test actual coating samples, using the Vibrio fischeri bioluminescence inhibition bioassay. The protocol was designed to test bactericide properties of specially coated PVC floors being used in hospital environments under quasinatural conditions, such as prolonged exposure or room temperature. To take into consideration that the light output of the bacteria under prolonged exposure naturally changes, a correction factor is proposed.

TiO2-Mediated Photocatalytic Mineralization of a Non-Ionic Detergent: Comparison and Combination with Other Advanced Oxidation Procedures.

Triton X-100 is one of the most widely-applied man-made non-ionic surfactants. This detergent can hardly be degraded by biological treatment. Hence, a more efficient degradation method is indispensable for the total mineralization of this pollutant. Application of heterogeneous photocatalysis based on a TiO2 suspension is a possible solution. Its efficiency may be improved by the addition of various reagents. We have thoroughly examined the photocatalytic degradation of Triton X-100 under various circumstances. For comparison, the efficiencies of ozonation and treatment with peroxydisulfate were also determined under the same conditions. Besides, the combination of these advanced oxidation procedures (AOPs) were also studied. The mineralization of this surfactant was monitored by following the TOC and pH values, as well as the absorption and emission spectra of the reaction mixture. An ultra-high-performance liquid chromatography (UHPLC) method was developed and optimized for monitoring the degradation of Triton X-100. Intermediates were also detected by GC-MS analysis and followed during the photocatalysis, contributing to the elucidation of the degradation mechanism. This non-ionic surfactant could be efficiently degraded by TiO2-mediated heterogeneous photocatalysis. However, surprisingly, its combination with the AOPs applied in this study did not enhance the rate of the mineralization. Moreover, the presence of persulfate hindered the photocatalytic degradation.

Degradation of industrial surfactants by photocatalysis combined with ozonation.

The efficiency of titanium dioxide-mediated photocatalytic degradation of pollutants can be enhanced by combination with another advanced oxidation procedure such as ozonation. Mineralization of hydroxy- and dihydroxybenzenesulfonate based on these methods, both individually and combined, was investigated by monitoring the total organic carbon content, sulfate concentration, pH, high-performance liquid chromatography as well as the absorption spectral changes. The mineralization efficiency of the combined procedure significantly exceeded the sum of those of the individual techniques. The comparison of the disappearance of the starting material and the formation of the sulfate ions indicates that desulfonation is not the primary step of the degradation. Moreover, in the case of the combined method, ring cleavage, and thus, partial mineralization can occur without desulfonation. Efficient degradation of other, widely used industrial surfactants, such as alkylbenzene sulfonates and alkyl ether sulfates, was also achieved by heterogeneous photocatalysis combined with ozonation, offering an applicable method for the removal of these pollutants.

Photocatalytic degradation of benzenesulfonate on colloidal titanium dioxide.

Titanium dioxide-mediated photocatalyzed degradation of benzenesulfonate (BS) was investigated by monitoring chemical oxygen demand (COD), total organic carbon (TOC) content, sulfate concentration, pH as well as the absorption and emission spectral changes in both argon-saturated and aerated systems. Liquid chromatography-mass spectrometry analysis was utilized for the detection of intermediates formed during the irradiation in the UVA range (λ(max) = 350 nm). The results obtained by these analytical techniques indicate that the initial step of degradation is hydroxylation of the starting surfactant, resulting in the production of hydroxy- and dihydroxybenzenesulfonates. These reactions were accompanied by desulfonation, which increases [H(+)] in both argon-saturated and aerated systems. In accordance with our previous theoretical calculations, the formation of ortho- and meta-hydroxylated derivatives is favored in the first step. The main product of the further oxygenation of these derivatives was 2,5-dihydroxy-benzesulfonate. No decay of the hydroxy species occurred during the 8-h irradiation in the absence of dissolved oxygen. In the aerated system much more efficient desulfonation and hydroxylation, moreover, a significant decrease of TOC took place at the initial stage. Further hydroxylation led to cleavage of the aromatic system, due to the formation of polyhydroxy derivatives, followed by ring fission, resulting in the production of aldehydes and carboxylic acids. Total mineralization was achieved by the end of the 8-h photocatalysis. It has been proved that in this photocatalytic procedure the presence of dissolved oxygen is necessary for the cleavage of the aromatic ring because hydroxyl radicals photochemically formed in the deaerated system too alone are not able to break the C-C bonds.

Photocatalytic degradation of 1,5-naphthalenedisulfonate on colloidal titanium dioxide.

Photocatalytic degradation of 1,5-naphthalenedisulfonate (NDS) was investigated by monitoring the absorption and emission spectral changes, chemical oxygen demand, total organic carbon (TOC) content as well as pH and sulfate concentration. Intermediates formed during the irradiation were also detected by liquid chromatographic-mass spectrometric analysis. The results obtained by the applied analytical techniques clearly indicate that the initial step of degradation is oxygenation (hydroxylation) of the starting surfactant resulting in the formation of an 8-hydroxy derivative, although desulfonation and some mineralization, that is, decrease of TOC indicating carbon dioxide generation, also take place at this stage. Further oxygenation and desulfonation lead to the destruction of the diaromatic naphthalene system, then to ring fission, producing diols, aldehydes, and carboxylic acids on the side-chains. A tentative scheme involving possible pathways of degradation is proposed, taking the intermediates detected by mass spectrometry into consideration. On the basis of the results of quantum chemical calculations, the most possible points of attack by HO radical were identified, supplementing the MS results, and elucidating the initial oxidation step in the degradation of NDS and the benzenesulfonate (BS) intermediate. Thus, in the case of NDS para position is favored for hydroxylation, while for BS, formation of the ortho-hydroxy derivative is preferred.